KC SCREENING LOUVRES

KC SCREENING LOUVRES

Categories: ,
General Details
The KC 120 system comprises banks of louvre blades, designed primarily to provide
visual screening at an economical cost, but not weather protection.

The Z profile blades can be installed angled upwards or downwards according to
direction of view, or double banked for screening from any angle.

Blade spacing can be varied, and louvres may be vertical, horizontal or inclined, according
to requirements.

Louvres are mounted on concealed mullions for a continuous appearance, and can form
an architectural feature of a building. The system is very flexible; banks and panels can
be made to any practicable size or shape.

All components are aluminium for long life with good corrosion resistance.

Technical Details
Applications Generally used for screening hvac and other
plant on roofs from higher buildings or from
low level. Blade centres can be adjusted to
suit sightlines and specific requirements.
Blades clip in place and cannot be removed
without special tools, so the system is
suitable for use in publicly accessible areas.
Blanked-off panels are available to provide
continuity of appearance where required.
Composition Blades, mullions and clips are extruded
aluminium grade 6063 T6 to
BS EN 755-2:2008, BS EN 755-9:2008
and BS EN 515:1993.
All other components are aluminium.
Fixings are stainless steel.
Accessories Mitred corners where required, and a variety
of edge trims and flashings to suit the
installation.
Size, shape Minimum blade centres 100mm.
Maximum blade length is normally 3.0m for
ease of handling/practicality.
Appearance Louvres provide clean lines with a
continuous appearance; no fixings or
supports are visible from outside.
Standard finish: polyester powder coating to
BS 6496.
Alternative finishes: PVF2, natural or colour
anodised AA25 to BS 3987, natural mill
finish. Where anodising is specified, the
aluminium will be of anodising quality.
Maintenance Periodic cleaning is required to maintain
appearance (this is a condition of guarantee
of finish where applicable).
Documents